![]() |
Imco Shorty Lower Unit ?
Just wondering if anybody has ever installed a pair of Imco Shorty's on a 353 Fastech without boxes..??
|
Don't know, but certainly looking forward to hearing about how it runs.
Its been on my radar for a while now. |
Originally Posted by Apexwarrior
(Post 4484839)
Don't know, but certainly looking forward to hearing about how it runs.
Its been on my radar for a while now. |
1 Attachment(s)
Originally Posted by tjcheney
(Post 4484647)
Just wondering if anybody has ever installed a pair of Imco Shorty's on a 353 Fastech without boxes..??
Our boat has exactly that setup. Runs 80-85MPH all day long power with 600hp per side. |
Jason - Sure, as he did my motors. Imco's are what he recommends as the solution to me blowing up drives. However, we don't know what the best drive height is, props, etc. I need to find someone who has done all the homework already on a later model 353 with my power.
And then pony up with the cash.. |
Hi There...But you have Boxes..?? I was wondering if it would work without boxes..??
|
Originally Posted by tjcheney
(Post 4485146)
Hi There...But you have Boxes..?? I was wondering if it would work without boxes..??
|
TJ - if you're looking for speed it's a big investment for a few mph from what I've heard. Unless you have motors capable of pushing your boat 85+ it might not be worth it. Might be better to put the 15k into the motors.
|
Well I'm not sure about the whole set up, but I have one brand new imco shorty for sale so let me know :-)
|
Hi Joe....You are right....!! Have talked with a friend who had a 90 mph 353 and has done everything to it...!! Big Power-Boxes-Shorty's....!!! He did a lot of research and learned a bunch from wrenching himself on it. My 353 with 502 MPI's only has 375 hours on it. I am going to beef up my drives with XR's and install a set of Whipple's..!!! Get the right prop and Enjoy..!!!
|
| All times are GMT -5. The time now is 04:32 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.