Driveline on 419
#1
Registered
Thread Starter
Driveline on 419
Looking for driveline help. My center motor driveline rattles at idle. From what I can deduct, it is the driveplate for the drive shaft worn and needs replacing.
Looked into the driveplate and find setups for velvet drives and no6’s.
But not the Bravo’s. Anyone replaced the flexplate?
BTW I’ve upgraded the 502EFI to 540CID 650Hp motors and looking to upgrade the driveplate.
But have to be sure the splines are the same.
Looked into the driveplate and find setups for velvet drives and no6’s.
But not the Bravo’s. Anyone replaced the flexplate?
BTW I’ve upgraded the 502EFI to 540CID 650Hp motors and looking to upgrade the driveplate.
But have to be sure the splines are the same.