Offshoreonly.com - 272 Questions?

Page 4 of 5

« First

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Formula (https://www.offshoreonly.com/forums/formula-36/)

- - 272 Questions? (https://www.offshoreonly.com/forums/formula/359711-272-questions.html)

Smoke eater

03-30-2019 06:40 AM

If your interested I may just have the silent thunder swim platform laying around pretty soon if you wanted to upgrade from the platform you have. Just a thought. Shoot me a pm if interested. It’s off my twin 89 272 sr1

The Sheikh

04-04-2019 04:52 PM

Quote:

Originally Posted by Smoke eater (Post 4679457)

PM Sent. I rode with my brother in his this weekend, and I really would like them to be the same.

J

flena

04-05-2019 01:27 AM

I need the measurement for the bow stop anchor loop to the bottom of the transom to set up a new trailer. I have a 1988 272 SR1. Can anyone help me?

The Sheikh

04-05-2019 10:18 AM

Quote:

Originally Posted by flena (Post 4680431)

I need the measurement for the bow stop anchor loop to the bottom of the transom to set up a new trailer. I have a 1988 272 SR1. Can anyone help me?

I can measure mine if you take pictures of the spots you are talking about.

J

flena

04-05-2019 11:32 AM

I do not have my boat to provide you with a picture of the measurements that I need. The measurement would be from the front Eye-
loop on the bow to the bottom of the transom where the drain plug is, it should be roughly 25 to 26 feet in length but I do not know the exact measurement or close to the proper measurement to set up the bow stop on my new trailer so I can pick up this boat that I just purchased.

The Sheikh

04-05-2019 12:32 PM

I will measure that for you this afternoon.

The Sheikh

04-11-2019 12:22 PM

Quote:

Originally Posted by Smoke eater (Post 4679457)

Heya Smoke!I shot you a PM, let me know if this turns out to be the case? I would like to get one if I can make it happen. The only thing keeping my boat from being an identical twin of my brothers, haha!

J

oconnor marine

04-12-2019 11:20 AM

Those valve covers are not tge stock ones. Fyi

The Sheikh

04-12-2019 11:24 AM

Quote:

Originally Posted by oconnor marine (Post 4681732)

Those valve covers are not tge stock ones. Fyi

Oh, I wouldn't have known. I wonder if they did some work on the engines at some point...

TomZ	04-12-2019 12:42 PM

I believe they're factory on Volvo. The motors may have been replaced at some point.

Mercruiser motors will have a serial number tag on the even side of the block above the starter.

All times are GMT -5. The time now is 10:29 AM.

Page 4 of 5

« First

Show 40 post(s) from this thread on one page