311 vs 292...first REAL boat
06-13-2019, 03:19 PM
#52
Registered
06-13-2019, 03:55 PM
#53
VIP Member
No, semi-custom, they call them styled fit now, from carver. 10% Military / Veteran discount for those interested. Must call to order and ask for discount.
https://dealerguide.carvercovers.com...searching=boat
Had the vents installed by Sail repair gal, plastic PVC caps to cover ladder posts and front marker light. I used the float worms to place over all the cleats. Used the float worm to put under side of cover where gas vent is, allows it to breathe better.
I did not use cover to travel, because of the vents installed, used the cockpit cover and blue taped edges to prevent ballooning.
https://dealerguide.carvercovers.com...searching=boat
Had the vents installed by Sail repair gal, plastic PVC caps to cover ladder posts and front marker light. I used the float worms to place over all the cleats. Used the float worm to put under side of cover where gas vent is, allows it to breathe better.
I did not use cover to travel, because of the vents installed, used the cockpit cover and blue taped edges to prevent ballooning.
Last edited by 97FASTech; 06-15-2019 at 02:56 PM.
The following users liked this post:
07-26-2019, 08:13 PM
#58
Registered
No, semi-custom, they call them styled fit now, from carver. 10% Military / Veteran discount for those interested. Must call to order and ask for discount.
https://dealerguide.carvercovers.com...searching=boat
Had the vents installed by Sail repair gal, plastic PVC caps to cover ladder posts and front marker light. I used the float worms to place over all the cleats. Used the float worm to put under side of cover where gas vent is, allows it to breathe better.
I did not use cover to travel, because of the vents installed, used the cockpit cover and blue taped edges to prevent ballooning.
https://dealerguide.carvercovers.com...searching=boat
Had the vents installed by Sail repair gal, plastic PVC caps to cover ladder posts and front marker light. I used the float worms to place over all the cleats. Used the float worm to put under side of cover where gas vent is, allows it to breathe better.
I did not use cover to travel, because of the vents installed, used the cockpit cover and blue taped edges to prevent ballooning.
Not a bad choice on the Carver cover, have one myself and feel it is a great bargain.
Congrats on the new to you boat!
09-20-2019, 01:26 PM
#59
Registered
Thread Starter
While I am awaiting my new boat lift in Florida, I added the name/graphics to the F311. I started on the port side and learned a LOT of lessons. They came out okay BUT the starboard side came out essentially perfect. The boat, oriented on the lift, will display the starboard side...so I am cool with the look (for now).
