242LS prop results and suggestions needed.
Just put a 350 MagMPI in my 1986 242. Running a alpha one 1.5 gr. I can spin it up to about 4,300 @43mph with a SS 3-blade 19” pitch.
i was going to try my 21” pitch Mirage plus but figured if I couldn’t spin the 19” past 4,300 it would be useless. any suggestions on what I could try to get the RPM up a little. Boat runs fine otherwise, gets on plane fine. Just looking for suggestions. Maybe someone tried something that worked good. |
Try stepping down to a 17. The max rpm on that engine is 4800 correct?
|
Originally Posted by Redneckcustoms13
(Post 4740566)
Try stepping down to a 17. The max rpm on that engine is 4800 correct?
|
I believe 17 will work for you.
|
I’ll try to hunt down a 17. Are the mirage plus props ok? Like I said I have a 21. Great looking prop but don’t think it will work for me.
|
I personally do not care for them. Some do, some dont. A bravo or revolution will perform better on a 242 in my experience. I dont believe they go down that small though.
|
Originally Posted by Redneckcustoms13
(Post 4740713)
I personally do not care for them. Some do, some dont. A bravo or revolution will perform better on a 242 in my experience. I dont believe they go down that small though.
any suggestions in a 17 pitch? |
Are you sure the engine is healthy, compression and leak-down testing, etc?
|
He said it was new in his other posts. Remember it is a small block 350 mag so it should be 300hp or so. Thats less than the 454 that came in the boat, also the sb vs bb torque issue here.
|
.030 over sb. Everything is new. I know it's not a BB and don't expect it to act like one. (Or identify as one) I guess just seeing if someone had anything close or prop suggestions.
|
All times are GMT -5. The time now is 08:01 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.