292 fastech going under the knife
This coming winter I will be having the transom re-done in my 292 fastech. I plan on de-rigging the boat from the front seats to the stern. I also plan on removing the windshield to have the trim re-powdercoated. I have some questions since I will be doing the de-rigging myself to save $$.
How do I remove the entire windshield? Where are the bolts/screws located? Any tips or tricks for tackling this task of de-rigging? thanks everyone! |
Chances are you need to inscrew the top frame, then remove glass, then you should have access to screws or bolt in the bottom railing!
|
PICS! or just buy my 292 once I'm done with it ;)
|
Originally Posted by SabrToothSqrl
(Post 4740744)
PICS! or just buy my 292 once I'm done with it ;)
|
Kicking around the idea of selling it. If/when I can justify a Monterey 305ss.
|
The windshield should come apart in 4 large pieces. You don't need to disassemble the complete frame. The pieces all interlock. Remove from back to front. Pretty easy, re-assembly can be an issue as you need to get new gaskets material for the bottom of the frames and makes realigning holes a bit of a challenge
|
All times are GMT -5. The time now is 08:59 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.