353 Hull Dimensions
 

Wondering if anyone has the factory hull specs for the 353 indicating common dimensions for trailer set up? I am converting a trailer for use under my new to me 2002 353 and want to get it as close as I can before attempting to load the boat. Many thanks, Steve

reach out to formula they can send you the info for trailer set up

Contact Scott Ransbottom at Formula. He is in the parts department. Give him your HIN and he should be able to email you the bottom specs and drawings.

Thanks for the contact. Have called and emailed the Vintage Formula line/address, but no reply yet. Used to have a few numbers but they dropped from my phone years back. I know they are extremely helpful. Thanks , Steve

[email protected]
I think that's his email.

I've not gotten responses in months either, I was looking for that info too. Wanted to buy or get info on the anchor locker thru hull fitting, but gotten nothing via phone or email.

The "Rona" has been making it's way around the factory. It had a couple departments shut down intermittently.

If your still having issues... I have a copy of my 98 353 ...should be the same ..will look for. It .. also you could call Manning trailers.. I'm sure they might can help ... m

Formula was able to send me the pdf this week. Pm me your email address and I can send you a copy.

Thanks all. Scott sent diagrams to me as well, so I should be all set with set up. He's a great resource. Thanks for the help