pic 3

Where do you get carbon fiber vinyl?

I purchased my vinyl from www.stickers express.com. You should be able to purchase the carbon fiber from anyone who sells vinyl graphics....

Here is a idea on al ayout for your Gaffrig. Did Mine out of 3/16" aluminum and used the old dash as a template. But I kept the factory fuel gauge and put it below the hour meter.

I will try pic this again

Here is picture of my Dash--I'd like to make an insert thatwould fill inside the entire perimeter and have gauges mounted on new acrylic woth yellow colr to match paint.

Can anybody suggest simple way for non-machinist/non-engineer guy to make pattern without learning new trade ???

Re: Need Help to Fab New Dash Panels
 

Fortunately aluminum is easy to work with. Make you a template out of poster board and tape it to the aluminum, cut with a band saw or jig saw, sand/dremel the edges and either power coat or epoxy to the color you want.