X-Dimension
 

Some recent talk of X heights...

Mine from factory is 19 1/2.

Re: X-Dimension
 

Please correct me if I am wrong, but I understand that the X-Dimension is the distance from the center of the propshaft to the center of the crankshaft....

Re: X-Dimension
 

DragonFire,
It's measured from the center of the prop shaft to the running surface directly in front of the drive.

Re: X-Dimension
 

Thanks Lofty.....

I've had that eroneous info in my head for8 years....

Re: X-Dimension
 

It is center of crankshaft to running surface. Otherwise 19.5" would be pretty high! It is usually around 18+"'s

Re: X-Dimension
 

Dave....from what i have heard there is about 3-4 to be had with -2 Sportmasters and herring 6 blades.
This is an 06 42 that has the power and X height to run 92mph....this "IS" the best setup 42 Ex out there.
http://www.chicagofountain.com/details.php?boat_id=147

Re: X-Dimension
 

Back4More, you said the word "power". It is my understanding that you need extra power to run these ultra high x-dimensions. I was told that simply raising the x-dim on a boat like mine (HP500 powered) will not gain speed unless I add HP. Is this true?

Re: X-Dimension
 

The term "power" was meant that this Ex is a 92mph setup with the 600SCi's

Re: X-Dimension
 

That is 5 mph better than my Ex 525's. GPS before it broke was at 87. That's alot of coin for 5.

I am already wanting to go faster go figure, need to save up some coin and get in upper 90's or 100 sooner than later. :cool: Sounds like TomCat Rtech is working on something for 525.

Re: X-Dimension
 

You went so fast you broke your GPS? :p