Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Fountain (https://www.offshoreonly.com/forums/fountain-37/)
-   -   Transducer 29 fever (https://www.offshoreonly.com/forums/fountain/140244-transducer-29-fever.html)

PIPELAYR123 09-11-2006 11:19 PM

Transducer 29 fever
 
hi all. have a 29 fever 2001. what is the best place for and what type of transducer is best. have tried transom mount and in hull. both no good. ive been told to put in a thru hull. good idea or bad? and where? thanks

FeverMike 09-12-2006 07:52 AM

Re: Transducer 29 fever
 
Go down in your cabin and lift up the door on the step into the cabin. This is were the transducer goes. It is a shoot thru hull type of deal. This is located before the step as you will not get a reading after the step due to the airated water like you have already found out. Keep in mind you will not get a reading much above 30-35mph but it will work fine in a no wake zone. Also to mount the transducer make sure the indie of the hull is clean smooth and flat. Take the transducer in a zip lock bag of water with the boat in the water and move it around till you get a good reading. That is wear the glue the puck like transducer down.

US1 Fountain 09-12-2006 03:45 PM

Re: Transducer 29 fever
 
A Fountain rep told me that it has to be mounted at least 12" off center, (center is cored). That would move mine into the round access hole that is inside my cabin step. When mounted in my engine compartment, it worked fine at rest. At idle, she quit registering.

FeverMike 09-12-2006 11:28 PM

Re: Transducer 29 fever
 
US Fountain yep the correct place is under the cabin step to the right side if you are in the cabin looking out. That spot under the cabin step down is right infront of the step in the hull. There should be a flat place built into the inside hull bottom to glue down the transducer. Use the water in the bag method though so that way you can find the perfect place.
I do not think Fountain hulls below the water line are cored though.

itilldo 09-13-2006 06:51 AM

Re: Transducer 29 fever
 

Originally Posted by US1 Fountain
into the round access hole that is inside my cabin step.

Last summer my transducer came loose so I had to reglue mine to the original spot. It was exactly where US1 states. Called manufacturer and recommend to use a two part epoxy. I cleaned the to be designated area really good and reapplied the puck and its been working, with no problems.

rackster 09-13-2006 04:05 PM

Re: Transducer 29 fever
 
It does need to be in the round access hole. The bottom is cored from the center to about 11" out. Call me if you need further assistance. (Chris @ 252-975-7048)

RJ1340 09-16-2006 09:07 AM

Re: Transducer 29 fever
 
Fever: this boating talk is confusing. Which is the right side, would that be port or starboard?

FeverMike 09-16-2006 04:33 PM

Re: Transducer 29 fever
 
RJ1340, from sitting in the boat facing forward the Starboard side is the driver side (on most boats) and the Port side is the passanger side.

Remember your the star in the boat thus starboard side. :D

Not trying to be a smartazz but didn't they cover this in your coastguard or Power Squaderon course? :D

Mark D 09-21-2006 11:05 PM

Re: Transducer 29 fever
 
Mine is indeed mounted hockey puck style under the cabin step.
For some lucky reason mine still picks up the bottom at higher speeds as well.

itilldo 09-22-2006 09:19 AM

Re: Transducer 29 fever
 

Originally Posted by FeverMike
.

Remember your the star in the boat thus starboard side. :D

:D


also port = left
4 letters 4 letters


All times are GMT -5. The time now is 08:28 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.