|
Re: Rub Rail not centered
2 Attachment(s)
Here they are
Is this your buddies boat?? If so it's looks great!!! http://www.offshoreonly.com/esvon/page-12792.html |
Re: Rub Rail not centered
Originally Posted by epeek
Here is my Fountain story. Bought a new 35x in Aug of 05.
After running it around for 2 weekends I had a small list of items and 1 major problem. The boat listed to port. :mad: |
Re: Rub Rail not centered
The listing problem is most likely water getting up past the engine box bulkhead up under the tank area and not draining back out cause of all the saw dust, fiberglass coreouts, carpet scraps, tank foam and other chit clogging up the 1" drain line on that side.
Get the bow as high as you can and use some fish tape to see if its clogged. |
Re: Rub Rail not centered
yea.thats the outerlimits. Awesome boat! I dont know how you choose when leaving the dock. Both gorgeous boats. Whats faster?
|
Re: Rub Rail not centered
Originally Posted by Drag 'N' Ass
No local dealer, live in Michigan. What I mean by the rail not being centered is the seam is not lined up with the stern light or the center of the transom. The seam is about 18" left of center. There is no Fountain logo cover over the seam, thank goodness fot that because it would make it look worse than what it is.
All I wanted from Fountain was a piece of rub rail and that would of taken care of the situation. I will still have it fixed then I will be able to consider my Fountain a one of a kind. Done! Bob The center trim piece is avalable from Pachangala on the board |
Re: Rub Rail not centered
Originally Posted by fastoys
yea.thats the outerlimits. Awesome boat! I dont know how you choose when leaving the dock. Both gorgeous boats. Whats faster?
|
Re: Rub Rail not centered
Are the whipples dependable? Any drive issues? How much MPH gain? Did you have to re prop? EFI?
|
Re: Rub Rail not centered
The whipples are very dependable with the efi's. The first year we had it, it was just a turn key. We bought the boat with all the work done to it. It was done by Bob Teague on the west coast. He said the boat ran 100 when new. We have seen 95, but we have just rebuilt the motors and haven't gotten any real numbers yet. The stock 500 boats ran 83-85 mph so it picked up 15mph. The drives were switched to 1:36 ratio to accomodate the power. We are running 30" 4 blades.
|
Re: Rub Rail not centered
Sounds like a sweet set up .A friend is putting whipples on a 2005 42 fountain with 525's. Curious 2 see how fast it goes.
|
Re: Rub Rail not centered
Originally Posted by fastoys
Sounds like a sweet set up .A friend is putting whipples on a 2005 42 fountain with 525's. Curious 2 see how fast it goes.
|
| All times are GMT -5. The time now is 03:44 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.