Tall Blocks
 

Question! Any body ever run 427/496 tall blocks in a 32'fountain.Is there enough room between the engine's.How far off does it make the transom exhaust holes.Reason is just run across a pair of fresh built blower motors,with all the good internals,crower aries manely,roller cam ect,ect. Thanks JOHN

Re: Tall Blocks
 

I have a pr. of tall decks in a 10 mtr (33) Fountain. What dimensions is it that you need to know??? Center to center on the tail pipes? How far apart they are?? Not quite sure what you're looking for.

Just remember this, when you switch from standard decks to tall decks, your headers get moved up .300 in. and out .300 of an inch.
I'll be down by the boat in the next few days, so let me know what exactly you want me to measure for you.

Frank

Re: Tall Blocks
 

The 33 has what seems to be a million square ft in the engine compartment over the 32. the side to side might be the same but not possitive. My old 32 was tight with 500's. There was enough room to squeeze my hand and arm through the center of the two if I tried hard. Loved the 32 though. alot of people dog them but it was good to me!!!

Re: Tall Blocks
 

Here is a pic of my 2001 32 with 572's (680 hp ea) its a little tight but they do fit!!! enjoy!

Re: Tall Blocks
 

what speeds are you seeing with the 680hp in the 32?

Re: Tall Blocks
 

103-104 ish