Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Fountain (https://www.offshoreonly.com/forums/fountain-37/)
-   -   454 engine/blower help (https://www.offshoreonly.com/forums/fountain/154687-454-engine-blower-help.html)

turbosonoma 03-28-2007 08:37 PM

454 engine/blower help
 
i have an 89 lightning with two 454's in it, turns out they popped the frost plugs when the last owner had it, i pulled both engines, and was going to go through them cause they had 427 hours on them, was also gonna add the weiand 256 blowers, problem is, i dont know much about boats at all, this is my first project, what should i do as far as freshening up the engines? compression? cam? carb? stock heads decent? a guy in town has a set of new 525 heads that he removed from his boat to upgrade, are those a good head for me to upgrade to at a good deal? or should i just keep stock ones?
Thanks for ANY help.

monstaaa 03-29-2007 06:16 AM


Originally Posted by turbosonoma (Post 2074300)
i have an 89 lightning with two 454's in it, turns out they popped the frost plugs when the last owner had it, i pulled both engines, and was going to go through them cause they had 427 hours on them, was also gonna add the weiand 256 blowers, problem is, i dont know much about boats at all, this is my first project, what should i do as far as freshening up the engines? compression? cam? carb? stock heads decent? a guy in town has a set of new 525 heads that he removed from his boat to upgrade, are those a good head for me to upgrade to at a good deal? or should i just keep stock ones?
Thanks for ANY help.

the weiand if im not mistaken is similiar to the b &m 250. these smaller blowers arent to effecient, as they tend to create alot of heat which defeats there purpose. they do make more powerover a naturally asperated version from a dependabilty stand point, but i might go with something from the blower shop and defineately use an intercooler, as this will keep the charge temp way down and make for a more powerful burn.
as for the 525 heads i dont think they ll work. different bolt pattern, they also have different exhaust i believe.
a client of mine has a pair of 454's with a good valve and bowl job, good cam with out too much over lap, bout 8 1/2 :1. runs a dominator over a b&m with an intercooler. the engines makr a stout 700 h.p on the dynowith about 5-6 psi of boost.
if youd like give me a call maybe i can help you out.
516 779 9642.

monsta

carney 04-15-2007 09:49 AM

If you don't know much about the motors , I would take them to a good engine builder and let them freshen them and run them. It is hard to make your boat or mine run fast or out front when you can buy a brand new 35 that will run over 100 on pump gas. I have spent lots of money playing with my blower motors , But I do most of my own work and must love taking them apart. But Good luck with what ever you decide.

bcfountain 04-18-2007 07:52 AM

i have a 250 tbs blower on one of my motors and like it.running 5-6 boost.it does make some heat when running under boost for awhile.

BOATMAN302 04-18-2007 10:26 AM

bc fountain : are you running a intercooler along with that.

bcfountain 04-20-2007 08:29 AM

tbs blower
 

Originally Posted by BOATMAN302 (Post 2097743)
bc fountain : are you running a intercooler along with that.

no cooler boatman.temps stay around 140-170 depending on the water temp,when i run under boost the temp can get around 180-200.i would like a cooler,but do not have the room.brad


All times are GMT -5. The time now is 02:46 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.