![]() |
38 Fever setup
I have a '99 38 Fever with 700 blower motors. Last year I ran the boat with stock Bravos at 90 mph turning 29 pitch Mirage 3-blades. At the end of last season, I broke a Bravo so I am swapping -2 Imco's. Has anyone tried shorty's on an older twin step hull like this? What happened? I am planning on running a Bravo 4 blade or maybe seeing if Throttle-up recommends a five-blade. Any advice is appreciated.
|
I just installed -2 Imco shorties on my single step 2001 35'. Just in the break in period now on the new drives. I'm using a Bravo 1 now and it planes easily. I won't know on top speed for several weeks and I have it labbed.
|
Originally Posted by Rebel_Heart
(Post 2134566)
I just installed -2 Imco shorties on my single step 2001 35'. Just in the break in period now on the new drives. I'm using a Bravo 1 now and it planes easily. I won't know on top speed for several weeks and I have it labbed.
I am very interested to hear the results on the new Imco's shorties. I have the same boat and have thought about the same mod. What gear ratio's and prop pitchs are you using, and what did you have before? I have Bravo drives with 1.5 gears and was told that Imco shorties would give more speed. TIA David |
Is a '97 35 a single step or a twin. does it have a notched transom
|
I run a set of 26p Hydro Quad 4s on my 99 38 Fev. 500 hps. Boat runs north of 80. You definately need 4 blades. I think there is a guy on here running shorties and 5 blades though with super results.
RAF |
I would love to here from the guy running shorties and five blades. setup is still a mystery at this point. this weekend i'm trying a pair of 30 bravos. i'll be thrilled if i can get on plane.
|
Originally Posted by nealmobile
(Post 2135893)
I would love to here from the guy running shorties and five blades. setup is still a mystery at this point. this weekend i'm trying a pair of 30 bravos. i'll be thrilled if i can get on plane.
That would be me. Here's the thread you want to check out. http://www.offshoreonly.com/forums/s...ghlight=picked So far the best prop for my boat has been a Hydromotive PX-5blade. But if you are running bravo's instead of XR's then you could easily start busting drives with 5 blades and that much hp. |
ohh, and be sure to watch your water pressure when you test it - mine was off the charts when I went to the -2 imco's - so much that I blew a hose off and had to install pressure relief valves to get it down.
|
1 Attachment(s)
this is a 99 with naturally aspirated 750's, 2" shorty lowers on 1:50 XR's. boat used to run around 103 104 with tricked out 14 1/8 x 32 4 bld mercury props. it ran a solid 100 with worked 5 bld maximus wheels. much better cruise and planeing time with the max's, just sacrificed top end a lil.
the engines turned around 5800 6000 |
Bo knows Fountains :)
|
| All times are GMT -5. The time now is 07:10 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.