![]() |
Originally Posted by Roger
(Post 2145748)
I have a 95 29 with 500 EFIs that are pushing 575 HP. I am running 29 hydro 4 blades that have been blueprinted. My limiters are set at 5800. It runs 92-93 at 5600 RPMs. Also my x has been raised by 1 inch from factory settings. Roger
|
thanks Roger
i appreciate the info. i won't be running that much horsepower but it still gives me a place to start. i was planning on trying a pair of 28 hydromotives as well as looking at 5 blade alternatives.
|
shakenntstrrd, my 29 came with 29s and the factory performance report stated 88.6 at 5350. The most I ever got stock was 87.5 before the changes. Plus my boat came with carbs not EFIs. Borrow a set of 28s before buying them, you may be able to spin 29s. Roger
|
thanks again Roger
|
I agree with Roger. I am running 29 Hydromotive Q4's on my 500HP's. They were perfect. I recently repowered to 585's, so now they are too small... I just had them redone from Tom at Hydromotive. They are perfect, and if you decide you want 29's they are available for you. Carder
|
I should be starting to run props this next week. If it looks like we're going to settle on hydro 29s I'll get in touch with you.
thanks. |
Originally Posted by Carder
(Post 2148860)
I agree with Roger. I am running 29 Hydromotive Q4's on my 500HP's. They were perfect. I recently repowered to 585's, so now they are too small... I just had them redone from Tom at Hydromotive. They are perfect, and if you decide you want 29's they are available for you. Carder
|
They are spinning inward
|
sorry, pullmytrigger, you weren't asking me, and I butted in.
|
Originally Posted by Carder
(Post 2149159)
sorry, pullmytrigger, you weren't asking me, and I butted in.
|
| All times are GMT -5. The time now is 12:40 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.