1st offer to my Fountain buddies
 

I sold my Ipod Nano and no longer have a need for this mount I made. (the white one). The back of of it has a step to fit over the side of the dash to hold it from rotating. It's visable in the 1st pic of my post. Just use 1 of the dash screws to mount there. No holes to drill. I made this mount to fit the Nano using the rubber cover, which I kept and will be included. W/O the cover, the Ipod will be sloopy. The bottom is sloted to allow the 1/8" headphone jack, and also sloted for the charger plug. Mine was the 1st Gen Nano, my buddy has the 2nd Gen Nano (more squared edges). Both fit the holder, just the headphone jack is a touch off between the 2. A round file and 2 seconds makes the 2nd Gen Nano fit this mount.

Offering this here 1st as I made it to fit the Fountain dash as pictured. If no one is interested, I 'may' mill the back flush for a universal location mount and list it in the swap section. I say 'may' because as soon as I do that, it'll flip out of the mill vice and bust up, so rather not mess with that chance. Thinking $40 pus shipping. You don't like it, return it. Just like Walmart. :)



http://www.offshoreonly.com/forums/s...highlight=dash

Can you send me pic of the holder?

Thanks,

Mike

You can't see it in the link? You don't accept PMs or email thru here.