Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Fountain (https://www.offshoreonly.com/forums/fountain-37/)
-   -   Staggered 35 with #6's Running Vid (https://www.offshoreonly.com/forums/fountain/234259-staggered-35-6s-running-vid.html)

Kelly O 07-07-2010 07:00 PM

Staggered 35 with #6's Running Vid
 
1 Attachment(s)
A little running video from Pirate gathering on Seneca Lake.

tomtbone1993 07-07-2010 07:05 PM

bad azz very cool set up anymore pictures?

RaggedEdge 07-07-2010 09:37 PM

Cool! I think you need to loosen that biotch up a little!!! :drink:

Looking forward to you coming up here in August, have a memo on the office calendar to check on the dockage for the Cig.

MahopacMarine 07-08-2010 08:10 AM

Great video but very short. I can tell you first hand, that thing RUNS!!!! Great to see you down here again Kelly.

Kelly O 07-08-2010 11:29 AM

Call me a tease !
If you want to see more, loosened up, longer, faster, etc. you will just have to get to one of the great events coming up around the northeast.
Then you will get to see it all.

After the season we can show some highlights.

A.O. Razor 07-08-2010 04:34 PM

Speed and power?

Nice looking boat.

custom29scarab 07-10-2010 09:58 AM

Nice you coming to the Swamp Run? It is really shaping up now. Rumor has it an MTI with 1075's is coming?

Kelly O 07-15-2010 12:16 PM

2 Attachment(s)
Ok, here are a couple more.
The business end and tearing up the Hudson outside NYC this spring.

Kelly O 07-15-2010 12:20 PM


Originally Posted by custom29scarab (Post 3155235)
Nice you coming to the Swamp Run? It is really shaping up now. Rumor has it an MTI with 1075's is coming?

We will be at the Swamp Run. Looking forward to seeing your boat.

Yes, there will be some major players there.

RaggedEdge 07-15-2010 02:16 PM

Guess I won't be running to close to that tail in a couple weeks!:eek:


Will get an update on Cig dockage for your bud this weekend.

techman 07-15-2010 08:35 PM

Seems like a lot of wetted surface in your video. Are the trim characteristics with the sixes different than a Bravo boat?

Seems like Ragged Edge is right....trim out! Let the bottom do it's job!

RaggedEdge 07-15-2010 09:41 PM


Originally Posted by techman (Post 3159783)
Seems like a lot of wetted surface in your video. Are the trim characteristics with the sixes different than a Bravo boat?

Seems like Ragged Edge is right....trim out! Let the bottom do it's job!


I'm guessing the pic is in some slop, I've seen some shots from the same run when it was aired out. I'm just bustin' on Kelly. Hoping to experience this beast aired out and haulin' azz in a few weeks.

My money says this Beak can can make your sticker peck up!!! :D

Kelly O 07-15-2010 10:08 PM


Originally Posted by techman (Post 3159783)
Seems like a lot of wetted surface in your video. Are the trim characteristics with the sixes different than a Bravo boat?

Seems like Ragged Edge is right....trim out! Let the bottom do it's job!

That video was shot cruising at 50 mph probably turning 2800 rpm. It is much different than a Bravo boat. Not much wetted surface when trimmed at speed.

We shall see what Ragged can teach me soon enough !

RaggedEdge 07-16-2010 10:33 AM


Originally Posted by Kelly O (Post 3159866)
That video was shot cruising at 50 mph probably turning 2800 rpm. It is much different than a Bravo boat. Not much wetted surface when trimmed at speed.

We shall see what Ragged can teach me soon enough !



I saw that other shot that Sharkey posted and it would appear you have it pretty well figured out, lookin' good and loose! :drink:

blownincome 07-16-2010 11:14 AM


Originally Posted by RaggedEdge (Post 3160202)
I saw that other shot that Sharkey posted and it would appear you have it pretty well figured out, lookin' good and loose! :drink:

Low and Slutty was Ok Too!!!... LOVE THAT LINE!!!!! Wish I thought of it!!!:drink::drink::drink:

aTX427 07-20-2010 08:17 PM

Looking good Kelly

Yamaha 225 07-27-2010 03:27 PM

aTX427: CALL ME! My number is 011 47 9026 0909.

In regards to your F42/700.

Thanks,
Erik


All times are GMT -5. The time now is 10:50 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.