|
Originally Posted by 10M
(Post 3394730)
I really like Ragged's black dash. Mine was black but changed to silver w/black and carbon fiber gauges. Here she is.
|
Originally Posted by 10M
(Post 3394741)
Also be careful of the etching...I redid mine 3 years ago and bought the panel with all the words etched in. It started to bubble up around a few of the letters and now it's spread all over the panel. I'm pretty good about keeping salt away from it, but it's going to need to be redone again just because of that. I think the etching breaks the seal in the coating and allows moisture to get in there. It's like cancer!
|
Go to Innotechproducts.com and check out the dash panels there. Steve has a lot of Fountain templates or can make one up for you. He matched my 2006 EC dash perfectly, was really pleased with it. Good luck!
|
Originally Posted by 32 vette
(Post 3394926)
Looks good. You went with gaff rig gauges
|
Originally Posted by mapism
(Post 3385228)
I just love it, very elegant and with a great visibility.
Is my understanding correct that you have both the standard and the upper trim/tab indicators? I would have thought that it's not trivial to connect both together. Not both, just the standard in dash indicators. There is a GPS mount on the dash that you may be taking for the heads-up indicators. |
| All times are GMT -5. The time now is 05:35 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.