Originally Posted by TylerCrockett (Post 3571465)

You misunderstood the three pistons not being coated. When the engine was built it had 8 pistons that were coated when we tested the boat at Fountain we burnt 3 pistons. That three were the ones we replaced and the coating did not affect the balance. And I am going to say one more time it was only the Starboard motor that was getting hurt not both........... 10X made the best statement above and I am all done commenting on this thread. DENNY here is the schedule I had to work with Note I had 4 days to order 3 custom pistons, Build the motor and have shipped back out in 2 days they cannot even do that on junk yard wars !! SCHEDULE I would like to start off by thanking everyone for trying to pull this whole thing together last week. Even though it didn’t quite work out, I feel confident that we are moving in the right direction. Below please find a schedule that I put together, which I feel is doable…it will be tight, but if everyone tries to make this a priority then I believe we can accomplish the dates. Please advise if I am off base.



9-6-11 (Today) Stbd Motor ships out this afternoon from RF to TC AND RF ships all 4 headers to CMI



9-8-11 Motor Arrives @ TC (Headers should arrive @ CMI as well)



9-8 – 9-12 TC repairs Stbd Motor (TC will stud head on Stbd motor prior to shipping to RF…he will stud Port Motor when he returns to RF to tune)



9-12 TC ships motor to RF (PM Pickup @ TC)



9-14 Motor and Headers Arrive @ RF (TC flys into NC in PM)



9-15 – 9-16 TC/RF install head studs on port motor, install stbd motor, install headers, lake test, tune….etc.



9-16 Seeley’s arrive in NC late afternoon/evening



9-17 Rip **** on Pamlico river with everyone….(My driver/hauler should be @ RF by around 5pm….if my truck doesn’t **** up again. LOL.)



9-18 Seeley’s fly out of NC



Additional notes for TC/RF



Tyler:

Please order and install the MSD upgraded ignition you talked to me about on BOTH motors.
Remember to bring Port motor head studs with you or make sure to ship them to RF
Please test all injectors on Stbd motor like we talked about.
Test intercooler…just to be safe


RF:

Please have trailer gone through…brakes, lights, bearings, etc.


Thanks!

Originally Posted by TCBoss302 (Post 3571531)

I'm sure this thread will continue with the back and forth jabs, but I would like to hear how the rebuild is going with updates/pics. Eric, how about starting a new thread (a positive one, no mention of Tyler) that documents things moving forward with Eddie? I think it would be good for your soul right now to have a positive thread that gets you excited about boating again. :ernaehrung004:

Originally Posted by TCBoss302 (Post 3571531)

I'm sure this thread will continue with the back and forth jabs, but I would like to hear how the rebuild is going with updates/pics. Eric, how about starting a new thread (a positive one, no mention of Tyler) that documents things moving forward with Eddie? I think it would be good for your soul right now to have a positive thread that gets you excited about boating again. :ernaehrung004:

Originally Posted by 1 MAIDEN AMERICA (Post 3571729)

50K views? Dude, get your business name and info on here. Maybe some business will come your way. At the least you could write all this off as "advertising".