![]() |
Originally Posted by Fountain Perf.
(Post 3638175)
Here are the actual drives and props for the boat....
They look fast just sitting there..... The boat will run, look and sound incredible. We are looking forward to receiving Eddie's motors very soon. Thanks guys for the business......we will do our best to make you happy! I just had to post this pictures of your drives.....It is simply awesome |
Originally Posted by mcprodesign
(Post 3638159)
Don't bother. If she is like mine... She is hard to get a good photo of around all that power!!! :D I was just a rassin ya
|
Originally Posted by mcprodesign
(Post 3638083)
I might add.. Just use the blue ones for now and buy another set to have done.. It could take a while. You can swicth them after the break in when you run the valves again
|
Originally Posted by Young Performance
(Post 3638619)
My guy can paint the covers in about a week and a half. Once the covers go on, they aren't coming off unless there is a problem. We set the valves when we build it and then forget about them. There is no need to run the valves again. Eddie
|
Originally Posted by Young Performance
(Post 3638619)
My guy can paint the covers in about a week and a half. Once the covers go on, they aren't coming off unless there is a problem. We set the valves when we build it and then forget about them. There is no need to run the valves again. Eddie
|
All of my engines are priced 100% complete and ready to drop in with engine mounts, bell housing and coupler, wiring harness and sending units, exhaust, etc. A lot of builders don't price their engines that way so sometimes it's not an accurate price comparison. With that being said, the exact price depends on exactly what you want. If we use a 3.3 Whipple, power will be limited to around a max of 1050. If we go with the 4.0 Liter, then it will be capable of well over 1200 hp. The price can run from $56,500-$63,500. The best way to go depends on not only the power you want now, but what you may want in the future. The variations in price are due to the blower used, heads, port work, etc. These prices are for a completely new engine. All parts are 100% new and the engine comes with a 6 month warranty.
The Seeley's do not fit into this catagory since they have quite a few existing parts. Their's will be no where near this much. Eddie |
Originally Posted by Young Performance
(Post 3638619)
My guy can paint the covers in about a week and a half. Once the covers go on, they aren't coming off unless there is a problem. We set the valves when we build it and then forget about them. There is no need to run the valves again. Also that way I don't take the risk of scratching the pretty covers. Eddie
Sorry dude but I've well exceeded my VOC limit for the day and I'm still not home.. :daz: |
You are definitely right. I don't want to mess up your pretty work. It killed me to run the covers on the Hustler engines on the dyno. I was a nervous wreck that they would get scratched. No one had the time to fix them.
I'll get with you on these covers when I get back in next week. I'm sure you will knock it out of the park once again. We got so many compliments on the Hustler covers. You should consider becoming a painter.:lolhit: See ya. Eddie |
Well since I'm coming to the sobering realization that I may never have a career in the NBA I'm keeping my options open, and yes considering painting as an alternative..
On a bit more serious note I'm glad you got your tail out of the shop for few days, but I'm guessing by the weekend she'll be ready to send you back anyways.. :bunnydance: Can't wait to get my hands dirty !! :cool-smiley-011::cool-smiley-011: |
Congratulations on being a class act in the marine industry Eddie. Guys like you are few and far between !
|
| All times are GMT -5. The time now is 04:18 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.