Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Fountain (https://www.offshoreonly.com/forums/fountain-37/)
-   -   07 fountain 600 sci's (https://www.offshoreonly.com/forums/fountain/259000-07-fountain-600-scis.html)

JMPH 07-27-2011 01:13 PM

07 fountain 600 sci's
 
anyone having trouble throwing blades on xr's?

fountainwoman 07-27-2011 04:50 PM

We have a 42 with 600 sci bravo xr drives....

I have had 4 blade bravo and six blade Herings on her and have never thrown a blade.

rexcramer1 07-27-2011 08:56 PM

If your props are labbed then you might want to have a talk with the company doing the work.

Stock Bravo props should not be throwing blades

JMPH 07-28-2011 08:45 AM

apparantly it is a common problem because of prop surfacing and flexing the blade.
just wondering if anyone has come up with a solution.

Von Bongo 07-28-2011 09:03 AM


Originally Posted by JMPH (Post 3464159)
apparantly it is a common problem because of prop surfacing and flexing the blade.
just wondering if anyone has come up with a solution.

1" spacers :party-smiley-004:

m3seth 07-28-2011 09:08 AM


Originally Posted by JMPH (Post 3463461)
anyone having trouble throwing blades on xr's?

Mudslide from Knoxville TN is/was having the same issue with his 07 38. PM him, he may be able to help you out.

575cat 07-28-2011 10:15 AM

my new herings are being cast thicker at the base as per jeff at Hering

JMPH 07-28-2011 01:03 PM

my new herings are being cast thicker at the base as per jeff at Hering

I think that may be the answer!!

Thanks

Beak Boater 07-28-2011 03:59 PM

Had an 06 38/600 XR drive boat. Ran 5 blade Maximus, never thru a blade, but did brake a drive.

JMPH 07-28-2011 05:35 PM

you will alway's break the drives, it's the weak link.
Have to upgrade to the IMCO scx. You can get away with with using the sc lowers for a while with the scx uppers.

Single With Twins 07-29-2011 07:59 AM

I have an 09 35 lightning with 525's.....last season with 5 blade labbed maximus I did have problems, three blades, I now have the 7 blade herings and no issues thus far after about 30 hours. Friend has an 07, same set-up with non-labbed maximus and no issues for what it is worth........one option as mentioned is to add a 1" spacer to drop the prop into the water and reduce it from surfacing, no experience with it, just an option that was offered to me.
Not problems or issues with drives, they have about 60 hours on them now.

Jay

575cat 07-29-2011 08:30 AM

How are the 7 blades working out comparison speed--rpms to your other props ?

Single With Twins 07-29-2011 11:40 AM


Originally Posted by 575cat (Post 3465090)
How are the 7 blades working out comparison speed--rpms to your other props ?

They work great! no real difference when getting out of the whole, mid range gain was huge, 5-6mph increase at 4100rpm.....top end only getting 5020-5040rpm but with me in the boat and say about 1/3 tank of fuel (needle showing over 1/2) 96mph.

mudslide 07-29-2011 10:35 PM


Originally Posted by JMPH (Post 3463461)
anyone having trouble throwing blades on xr's?

If your running 600's with XRs and sportmasters with a X dim 22 1/2" on a Fountain you will have problems throwing blades and blowing uppers. They will last maybe a season if your lucky when its all new. (if its a short one) One thing I made sure of was to have enough drinks to keep everybody happy on those 2 to 4 hours idle backs. If the crew starts b****ing after you just lost another 4K or more that would really suck.


All times are GMT -5. The time now is 10:36 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.