Next Project for my 29
02-21-2012, 11:31 PM
#21
Charter Member
Looks good.
I took my bolsters apart a few yrs ago and sanded the wood in rear inside corners some. Seems like that areas is a high impact point with coolers. Knocking off the sharp corners really took the risk of the vinyl getting damaged. Just something to keep in mind while installing all the skins.....doesn't take much, just a nice round over.
I took my bolsters apart a few yrs ago and sanded the wood in rear inside corners some. Seems like that areas is a high impact point with coolers. Knocking off the sharp corners really took the risk of the vinyl getting damaged. Just something to keep in mind while installing all the skins.....doesn't take much, just a nice round over.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
02-29-2012, 02:38 PM
#28
Platinum Member
Platinum Member
Wow what a difference looks awesome!
02-29-2012, 04:11 PM
#30
Registered
Thread Starter
iTrader: (1)
Join Date: Apr 2011
Location: Vero Beach, FL
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Next and final project (for a while anyway) will be the audio system. I'm planning on starting that one in April.
Thanks everyone for the comments!!
