I have them...Ill send a pic.

Thanks , I look forward to it .

6-7 @ 5500 . Arizona speed 3.5 upper pulley. Bravo style 15 " dia props = too hard to plane. Had to head it into the wind to get to plane.

6-7#? Sweet! Can't wait to get some.
@ 5500? You didn't post a MPH. Hope it's close.
I'm grabbing the other props tomorrow but it's probably gonna rain for the next week+ so not sure when I'll get to go back out.

Do you have any 34-35's that will fit a 1 1/4 shaft ?

i have a set of 35 pitch bravo ones that were labbed at mercury very little use they are posted on oso under props .they were 36 castings labbed to 35.

I have a set of Hering 6bl 15.5" X 35 that I will be selling. I've promised another local 38 Fountain that he could try them. He's in the same boat (there's a pun if I ever saw one)I'm in though. Waiting for the rain to stop! It may be a week or two(@#^#$@#$%$#) away.
However, $ talks. Whatchya thinkin'?

47 lightning I really think I need at least 5 blades but I been checkin those props up they look sweet.Rob, I'm gonna check with Reggie and see what he says about running a 6 blade might tear up my bravo one's pretty bad though. by the way if you wanna come to the races at Puddingstone I'll put you up at my house. I am only about an hour and 20 from puddingstone it's like right next to Imco where I was yesterday. Gordie says he's gonna have 7 K boats running!:eekdrop:

Awesome. Thanks but I can't do this one. Airfair is 1/2 a tank of fuel. Charlie and Brian are going with the K. They could probably bring the 35's. ????$$$$????lol
As for props. It's like guns.
Guns don't kill people. People kill people.
Props don't kill drives. Engines kill drives.
Well, maybe not.
Mine lasted 100 hours before gear failure with these props.
Its inevitable with a Bravo in a 38' boat with 700HP. That's why I went to SCX.
I loved my Maximus'. 2 years before the prop cracked.
I cracked 4 Bravos in one year. If you do go Bravo, sand the trailing edge lengthwise to get rid of the stress risers.

I think that when we're at 0 prop center align and we try to trim up what it does is it puts the front of the bullet down and it hooks the water. when we were down under water it didn't make that big of a difference