33 10 meter executioner speeds with 700-750's
 

What kind of MPH should be expected out of this with 700-750hp aside dialed in? The bottom has been blueprinted, done, has been switched to bravo drives, with a slightly higher X?


Thanks

John jr

T T T


John jr

gotta be close to the C note. im putting together a 33ex with 750's and #5's and we are shooting for a little over 100

Thanks, thats what I am hoping. i would be happy in the low 90's.. Any other people want to toss out a opinions/guesses?

John jr

Should run over 100.

Brian Bunch's '86 10 Meter ran low 90's with de-tuned 750 Supercat motors and Konrad drives.

90's

This is great, kinda what i was wanting to hear. I am sure a drive upgrade will be in the future, but for now we gonna see how well the B1's will take it( being easy on the out of the hole stuff)

Thanks
John jr

The guy I know runs this set up on TRS's....very gently

As in 90's, if so what power?

Thanks

John jr

700-750 on blowers

I think 10x on the board here has about 850 a side, and runs around 110'ish i think with ssm iv drives on boxes.

Good call, I know exactly who your ref'n to. Boat was said to run in the 80's with 525's in it, after talking with the previous owner. Would love to have it splashed this year, dialed in.


John jr