transom videos
 

http://deanqunellauto.com/fountain.html yes it is long and some boring but still interesting . Had 2 go pros one 1 way under the notch near the pickup and 1 down low near the transom assemblies , the lower 1 quit about 15 minutes into it , going to space down as per Reggie 3 he says its about an inch to high prop slip is way high 30 + % and out of control above 90 , also no lift feels heavy .

My POS Laptop circa 1997 wont load the video. I did see where it got REAL close to the ramp!! Yikes! Ill check it out when I get to a computer that doesn't run on DOS.

Very cool. That was a close call! Always interesting to see what is going on underwater while at speed.

Seems like the drives are screaming allot and the speed was only about 75 .

That was cool!
I held my breath when i saw the ramp and skeg just clear.

Yah when I seen that I did the Homer simpson scream :lolhit:

Off topic but that sure shows why depth transducers don't work well at speed !
ed

How do you have the Go Pro mounted on the notch? I want to do the same but I am afraid of looseing the camera

That was cool and interesting thanks for posting

Th e stick on clips that come with the kit hold dammed well Im going to leave them on my trans and add another off to the side , I know its risky but youve got to try , 1 was my sons he just got and was nervous and 1 was mine I had for 6 + years and never used but it wass cool , and yes the under the notch was hanging upside down and he downloaded it rightside up, just do it