I'm doing everything that "doesn't work"
03-25-2014, 08:17 PM
#1
Registered
Thread Starter
I'm doing everything that "doesn't work"
That's right! "Arnesons don't work on a Fountain", so I'm having them installed this month. "LS engines won't push a boat that big", so I'm building a couple to put in it. Geez, I hope everyone is wrong.
Here are the stats. The hull is a '98 that was formerly powered by triple 525SC's and Bravo 1's. With labed 29 Hydros it ran 90 on GPS. The new power is a line of LS motors that I'm developing. Currently the entry level setup is testing well, so now it's time to test it in the real world. If everything goes right I hope that I can drag it out to a few poker runs and maybe even the shootout.
Here she is getting ready to get some glass work.
Here are the stats. The hull is a '98 that was formerly powered by triple 525SC's and Bravo 1's. With labed 29 Hydros it ran 90 on GPS. The new power is a line of LS motors that I'm developing. Currently the entry level setup is testing well, so now it's time to test it in the real world. If everything goes right I hope that I can drag it out to a few poker runs and maybe even the shootout.
Here she is getting ready to get some glass work.
Platinum Member
03-25-2014, 09:24 PM
#6
Registered
Awesome project! More pics please!
03-25-2014, 09:26 PM
#7
Registered
Thread Starter
03-25-2014, 10:05 PM
#8
arneson-industries.com
Offshoreonly Advertiser
That's right! "Arnesons don't work on a Fountain", so I'm having them installed this month. "LS engines won't push a boat that big", so I'm building a couple to put in it. Geez, I hope everyone is wrong.
Here are the stats. The hull is a '98 that was formerly powered by triple 525SC's and Bravo 1's. With labed 29 Hydros it ran 90 on GPS. The new power is a line of LS motors that I'm developing. Currently the entry level setup is testing well, so now it's time to test it in the real world. If everything goes right I hope that I can drag it out to a few poker runs and maybe even the shootout.
Here she is getting ready to get some glass work.
Here are the stats. The hull is a '98 that was formerly powered by triple 525SC's and Bravo 1's. With labed 29 Hydros it ran 90 on GPS. The new power is a line of LS motors that I'm developing. Currently the entry level setup is testing well, so now it's time to test it in the real world. If everything goes right I hope that I can drag it out to a few poker runs and maybe even the shootout.
Here she is getting ready to get some glass work.
Disregard those that dissuade and concentrate on what works. A good boat is a good boat, nothing from Arneson will change that. Turbo Charged Small Block's are even better. Those should put a thrill in the bilge.
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com
