35 ex theoretically
#1
Thread Starter
Registered

Joined: Sep 2013
Posts: 1,652
Likes: 390
From: Syracuse Ny
got myself a 04 ex to do some funky things to. going to pick it up in the next week or so. its a bare hull so im going to go nuts on it.
now, theoretically,
has anyone EVER staggered one?
has anyone put arnesons on a single step 35? if so how did it work?
are there any single step 35's with 3's 4's or 5's?
how much power is too much power for this hull?
i know side by side 525efi bravo will run deep into the 90's...
ill be posting photos of the build once i decide what to do. going to be the advertisment boat for 2017
cheers
now, theoretically,
has anyone EVER staggered one?
has anyone put arnesons on a single step 35? if so how did it work?
are there any single step 35's with 3's 4's or 5's?
how much power is too much power for this hull?
i know side by side 525efi bravo will run deep into the 90's...
ill be posting photos of the build once i decide what to do. going to be the advertisment boat for 2017
cheers
#3
Registered

Joined: Jun 2007
Posts: 7,330
Likes: 1,835
From: Merritt Island, FL
#4
Registered

Joined: Apr 2006
Posts: 10,041
Likes: 712
From: Toledo Oh
Its fiberglass, staggering it would be simple, nothing a sawzall cant fix, move some stringers and bulkheads...What you really need to figure out is what the stagger is going to do the CG on a single step.,,,35' is definitely long enough to stagger though. You plan on keeping the cabin? If you can shed that and watch the weight on the new stringer/floor setup you could theoretically shed a bunch of pounds and maintain the same CG..
#6
Registered

Joined: Feb 2010
Posts: 102
Likes: 0
From: MA
Thanks
#7
Thread Starter
Registered

Joined: Sep 2013
Posts: 1,652
Likes: 390
From: Syracuse Ny
Its fiberglass, staggering it would be simple, nothing a sawzall cant fix, move some stringers and bulkheads...What you really need to figure out is what the stagger is going to do the CG on a single step.,,,35' is definitely long enough to stagger though. You plan on keeping the cabin? If you can shed that and watch the weight on the new stringer/floor setup you could theoretically shed a bunch of pounds and maintain the same CG..
#8
Thread Starter
Registered

Joined: Sep 2013
Posts: 1,652
Likes: 390
From: Syracuse Ny


