Front 35 Bow Hook
 

New purchase. Mines a tad loose. Is there nuts underneath and accessible through the front of the cuddy
98 35. I’d like to reseal with 5200

just purchased.


https://cimg6.ibsrv.net/gimg/www.off...6941fde9c.jpeg

Yes there are. If you have a mirrored panel in front of the V Berth, remove the screws and the nuts on that hold the eye hook are right there. Is is leaking now? Or just loose? BTW, nice looking rig !

I need to go out and check if it’s mirrored. It’s raining so I’ll wait until tomorrow. No leaks. Just a little wiggle. Don’t want to tie an anchor to it if it’s loose.

You can access it like said behind the mirror / forward bulkhead in front of b berth.

I got it removed. There’s a huge rod connection between the bow hook and the front winch clasp with no screws or bolts ?

What I did with mine was , took the 2 small nuts and bolts out unscrewed the bow hook from the threaded rod made a small gasket because I did not want to scratch the paint put it back on and tighten it up.