502 mag mpi in 2000 Fever 32'
 

Anyone have any experience in running a 2000 32' Fever with 502 MAG Mpi's ?

I have a 1997 32' with 502 MPI's, I do not believe it's much different then 2000, What's the question?

Are the motors too heavy for the hull?
Black or blue in yours?

same weight as 454 mpi’s. :)

I had 454s in my 29 so it will be OK

The 32's sit really low in the back. They always look like they are sinking.

I have HP500EFI in my 2000 32. The first non step hulls were no to bad, then they cut small steps in and reduced the flotation. They sit lower.
1999/2000 time frame they went big step and they sit even lower.

I have the black 502 MPIs. Yes, sits low. Swim platform touch the water. Mine leaked. Took rub rail off and resealed.

Can you even beach them? I’d just go bigger, they are hot rods though

Thanks all.
I just put an offer in on a 2000 - 32 with black 502s subject to the ususal survey, mechanical inspection and Sea trial.
320 actual hours on motors. Never opened.
Very similiar boat to my 29' 1998 with 454s but with a bigger step and 3'