twinn29: What avitar????:D :D :D :D

I seen this 51 in boat trader:http://adcache.boattraderonline.com/6/9/0/28158990.htm

I also seen the one with the surface drives previously. How long is that boat really ? It has beaks at both ends!

Those Look like Pulse Drives. Is that what they are ?

No.
they are non-trimmable drive from ZF
All Pulse Drives are Trimmable.

Those are surface drives, with rudders. I think it's wither a 51 or 52 footer, and they made 2-3 of them. This one is in Dana Point and is serviced by Dick Simon Marine. The name of the boat is Fly Paper, but I don't know why. I think it's a 1998.

These pics were taken at the launch ramp. Cigarette was having a presentation at the ramp of the new 35' Playboy Cigarette just prior to a Cig run to Catalina, then DSM rolled this thing into launch it for the client......all heads turned away from the Playboy Cig and the Playmates stealing their thunder for a few minutes. :D :D :D

http://www.vxi.cc/phantomchaos/images/P0001138-w.jpg

Optima's
 

Out with the old in with the new, I am waiting on the blue billet battery brackets from Eddie Marine. Plus I loose 12 lbs per battery too.

Hey Ray-

Here is a guy in SCOPE that is parting out a front damaged 47 Fountain. Maybe some stuff you need?

http://66.34.157.161/cgi-bin/ikonboa...orum=4&topic=6

I started cleaning up the Bilge area, What a mess, Oil and fluids all over. Here is a picture of what I started with:

Here is what I have so far, I need to tie up a few loose ends then clean, clean and clean. Then I am going to re-paint the bilge white. Or at least as much as I can get too.

Parts is Parts, Next week it goes off to Mitcher T for paint.

Ummm......you must have used a dirty rag while cleaning....the before pick on the bielge looks cleaner! (just messing with ya!)