Bluprinting My Hull and...........
#1
Registered
Thread Starter
Join Date: Feb 2001
Location: Portage,IN
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
Blueprinting My Hull and...........
.........Various fiberglass repair.
I'm having my hull blueprinted and some fiberglass
repair done at Capt'n Nabbers Shop in
Morris,Illinois (815)941-1546
I stopped in today and this is what was being done
I'm having my hull blueprinted and some fiberglass
repair done at Capt'n Nabbers Shop in
Morris,Illinois (815)941-1546
I stopped in today and this is what was being done
Last edited by StrikinLightnin; 12-02-2003 at 07:52 PM.
#2
Registered
Thread Starter
Join Date: Feb 2001
Location: Portage,IN
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
Deck sanded and rough cut buffed.
Later the entire boat will be sanded out
with 3000grit and buffed
Later the entire boat will be sanded out
with 3000grit and buffed
Last edited by StrikinLightnin; 11-24-2003 at 09:51 PM.
#3
Registered
Thread Starter
Join Date: Feb 2001
Location: Portage,IN
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
Gelcoat around bow cleat was cracking 'cause the previous
owner let it get loose
Now it's been ground out and filled in with Fiberall
owner let it get loose
Now it's been ground out and filled in with Fiberall
Last edited by StrikinLightnin; 11-25-2003 at 01:13 PM.
#6
Registered
Thread Starter
Join Date: Feb 2001
Location: Portage,IN
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
Hull is sprayed with a tracer tint
and then high spots are sanded
with a 2' sanding block with 80grit.
and then high spots are sanded
with a 2' sanding block with 80grit.
Last edited by StrikinLightnin; 11-25-2003 at 01:28 PM.