Need Smoked doors 90' 35 lightning
 

Broke Port Door this Weekend To the Cuddy..Not ready to convert to white doors just yet....Anyone Out there have a set of takeoffs????
Thanks
Bob..

Re: Need Smoked doors 90' 35 lightning
 

If not, I'm sure a local glass company may be able to cut a new one with the same material to match. I had a custom tinted plexi-glass flybridge deflector cut one time.

Wonder if Fountain parts still has any around?

I know everyone has gone white, but I still like the looks of the dark tint and would not go white on this boat. I could live with it on a newer one though.

Re: Need Smoked doors 90' 35 lightning
 

Dave..
A friend of mine has a glass co.. I asked him if he could make one he said yes but couldnt match the edge (polished) will go that route if all else fails..
Bob

Re: Need Smoked doors 90' 35 lightning
 

tap plastics??

Re: Need Smoked doors 90' 35 lightning
 

???????? Lost me?? :crazy:

Re: Need Smoked doors 90' 35 lightning
 

Give me the hull number of your boat, and also name and daytime phone number, Or call me at work (631)-728-0286 and tell them you need Fountain Parts and they will get me. I will call Fountain and see if they have or can make and how much. Which door do you need?

-Vinnie

Re: Need Smoked doors 90' 35 lightning
 

Why not? Just wet sand then polish with Novice plastic polish. Piece of cake.

Re: Need Smoked doors 90' 35 lightning
 

Does Novice work good for minor scratches? I don't want to wet sand, it is 98% good now.

Re: Need Smoked doors 90' 35 lightning
 

Don't use plexi-glass, make sure you use polycarbonate, it will hold up
much longer and is much more durable.

Re: Need Smoked doors 90' 35 lightning
 

tap plastics is a company i thought was nation wide might not be,,,
i had the 92 35 and they said they could even duplicate the windshield...
i know they have em all over the bay area in calif,,,

Re: Need Smoked doors 90' 35 lightning
 

The polycarbonate (commonly refered to as Lexan) is stronger than acrylic (commonly refered to as Plexiglass) but is not as easy to work with. The poly does not polish on the edges as nicely and is not as scratch resistant as plexi. You can bend plexi by using heat but the poly will require a brake of some type. It is also easier to polish scratches out of plexi and you can "flame polish" the edges. The plexi is typically less expensive.

Re: Need Smoked doors 90' 35 lightning
 

Has anyone swaped over to white and what did it cost???

Re: Need Smoked doors 90' 35 lightning
 

One of my white doors recently cracked on my 38, does anyone have any suggestions on either fixing these doors or hvaing a new one made?

Re: Need Smoked doors 90' 35 lightning
 

Call 252975200 Ext 3 Ask For Robert They Will Make It

Re: Need Smoked doors 90' 35 lightning
 

What door broke Port or star???I have a line on a port door in white (new)