![]() |
Whipple's on a Hp500 Carb
I am looking to put Whipple's on my Hp500's does any one know if they will fit under the stock hatches (with intercooler). I would like to keep the hatches as is, and the engines are staggered.
What is the typical pitch change for an additional 200Hp. |
Re: Whipple's on a Hp500 Carb
I have 500 efi,s with whipples and no problem fitting under hatch. I did not change props but did A gear change to 1:36 Picked up 12 mph 82 to 94 @ 5100 rpm 5 blade maximus 30 pitch Lab. I am running a 2001 35 ,Lightning.
|
Re: Whipple's on a Hp500 Carb
With the gear change how did that effect your coming out of the hole, and what was your RPM prior to the change. Nice increase by the way.
|
Re: Whipple's on a Hp500 Carb
put the tabs at #4 throtle up to 2200 and she pops right out. With the 5 blades low and midrange is great. 2800 rpm drives at #3.5 to #4 tabs at 0 56mph . 3000 rpm is 60 61 mph great for fuel and engine life. Only thing to be aware of is at idle shifting into reverse when cold it will stall.
|
Re: Whipple's on a Hp500 Carb
Thanks I appreciate the input. How do you like the 5 blades and what pitch are you running. I am running Bravo One's and cruising is horrible.
|
Re: Whipple's on a Hp500 Carb
30 pitch merc maximus 5 blade lab finished. Had 30 pitch bravos and though they were fine,now I know better. On a trip to long island and back with the bravos I burned 100 gallons of fuel, same trip with maximus props burned 85 gallons. At 2.75 a gallon for high test the price of the props get cheaper every time I use the boat.
|
Re: Whipple's on a Hp500 Carb
I may have to look into that, sounds like they will pay for them selves.
|
| All times are GMT -5. The time now is 04:57 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.