Offshoreonly.com - how to trim a 29' twin,non-step

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Fountain (https://www.offshoreonly.com/forums/fountain-37/)

- - how to trim a 29' twin,non-step (https://www.offshoreonly.com/forums/fountain/89645-how-trim-29-twin-non-step.html)

masher44

11-02-2004 02:58 PM

Re: how to trim a 29' twin,non-step

Carefull trimming too much... there is no gimbal support above 5. You will decrease your gimbal life big time. I run a 28" Bravo One with a single 525efi. Maybe on yours the trim setting is different.

cooltoys61

11-02-2004 05:33 PM

Re: how to trim a 29' twin,non-step

When I'm trimmed in it bottoms at around #1 so I'm at about 5 clicks (reads #6)when it started behaving well.

All times are GMT -5. The time now is 10:28 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page