Trim Tabs
Has anyone come up with a setup to control the tabs from the throttle? It would make my 22' less stressful to drive.
|
Re: Trim Tabs
Livorsi!!!! You can have the switch work the tabs or drives. Get the handle with 2 switches and you can control both the tabs and drives or both tab/drives independently of each other. Depending on the controls that you currently have, you can also get the add on kit from Livorsi.
Fred @ Trick Marine is a good source for Livorsi products www.trickmarine.net |
Re: Trim Tabs
just got done changing out my single switch on the throttle to a twin switch on the throttle. This is for the drives. You can do the same for the tab or tabs also. If you have two I would recomend twin buttons to proper leveling. Only place I have found the twin switch was through Rex Marine.
Also you may look into one for the sterring wheel. I have a single switch on the steering wheel for my center tab Here is the twin button I just put on from Rex Marine http://www.rexmar.com/images/page40.jpg |
Re: Trim Tabs
That's great thanks for the help.
|
Re: Trim Tabs
1 Attachment(s)
|
Re: Trim Tabs
Originally Posted by damdonzi
|
Re: Trim Tabs
Definately nothing personal fred .. I know your competetive price wise ..
Im just saying that "for what it is" its a lot of dough :drink: |
Re: Trim Tabs
Originally Posted by damdonzi
first, if your handles cant forward you may not have room Second and mor important in my book, they are not ergornomically correct. At least the one I have is right in line with my thumb. Next best thing to do is get new handles with the switches right on it :) However, even then the thumb needs to be retracted some unless you have real small hands :( One I really really like is the Marine machine throttles. but damnnnnn$$$$$$$$$$$$$ they have two little push buttons on the front, very easy and slick setup |
All times are GMT -5. The time now is 09:00 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.