Labor $$ for gimbles rings
#1
Registered
Thread Starter
Join Date: Aug 2002
Location: Lake St. Clair Mi.
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Labor $$ for gimbles rings
Whats a fair price to have the gimble rings replaced
twins bravo 1 If needed quoted 1250 labor and 800 each ring Is this in the ballpark?
twins bravo 1 If needed quoted 1250 labor and 800 each ring Is this in the ballpark?
#2
Registered
Re: Labor $$ for gimbles rings
Try Wildthing/ Taz on the board ,, He rebuilds gimble rings and sells a DIY kit that makes changing pretty simple and servicing even easier.,, His phone is 216-390-1330 he is the B-Max dealer/ JR Marine ,,, Ask Ron
#4
Registered
Join Date: Apr 2003
Location: Lake George N.Y.
Posts: 1,530
Likes: 0
Received 0 Likes
on
0 Posts
Re: Labor $$ for gimbles rings
Originally Posted by CIG3
Try Wildthing/ Taz on the board ,, He rebuilds gimble rings and sells a DIY kit that makes changing pretty simple and servicing even easier.,, His phone is 216-390-1330 he is the B-Max dealer/ JR Marine ,,, Ask Ron
if the swivel pin is corroded in. That job is not for
faint of heart. You have to be very mechanical to get thru it
if there are corrosion issues. By the way,I did use Rons
kit. Its the only way to go. But its still a pain in the a$$
job!!!
#5
Registered
Thread Starter
Join Date: Aug 2002
Location: Lake St. Clair Mi.
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Re: Labor $$ for gimbles rings
Originally Posted by wildthing357
I paid around $ 1600
#6
Performance Boat Center
VIP Member
Re: Labor $$ for gimbles rings
and don't forget that IMCO has billet gimbal rings.....
You may want to check the $$
You may want to check the $$
__________________
Tim Gallagher
Performance Boat Center-FL
[email protected]
954-809-8739
Wright Performance, MTI, Cigarette, Sunsation
Tim Gallagher
Performance Boat Center-FL
[email protected]
954-809-8739
Wright Performance, MTI, Cigarette, Sunsation
#7
Registered
Join Date: May 2002
Location: Rochester, NY
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Re: Labor $$ for gimbles rings
$800/ring isn't bad $'s. If you shopped for the parts only, you do a little better.
The labor $'s seem high, but I don't know what hourly rate you are dealing with. Don't forget, they'll need to drill side access holes, or go with front style plate with drilling/punch-out as well. Either way, it is a major pain in the azz.
The labor $'s seem high, but I don't know what hourly rate you are dealing with. Don't forget, they'll need to drill side access holes, or go with front style plate with drilling/punch-out as well. Either way, it is a major pain in the azz.
#8
21 and 42 footers
Platinum Member
Re: Labor $$ for gimbles rings
Just had a motor pulled and rebuilt. The gimbal ring on that side was bad too so we replaced it while in there. Labor is hard for me to judge since the motor was out already, but I think I paid for an addl. 6 hours labor for the ring replacement. The ring was almost $800 parts only. It seems the price is for them to pull the motors to do the replacement. There is a kit where you drill large holes in the top sides of your transom assembly, but I wouldn't recommend that route for both cosmetic and quality of work reasons.
Good Luck....
Good Luck....
#9
Re: Labor $$ for gimbles rings
Originally Posted by CIG3
Try Wildthing/ Taz on the board ,, He rebuilds gimble rings and sells a DIY kit that makes changing pretty simple and servicing even easier.,, His phone is 216-390-1330 he is the B-Max dealer/ JR Marine ,,, Ask Ron
This should be you first call, talk to Ron. His kit makes the job much easier and when I did mine he had rehabed rings at a decent price if you send your old one back.
Buy a set of his knoched, custom bent wrenches and have at it.
#10
Registered
Re: Labor $$ for gimbles rings
Originally Posted by Lime Disease
Was that labor or the whole thing. If whole thing who I`m on lake st. clair too.
That was the whole thing, I had Millenyum marine do it in Harrison twp. Lenny did a great job for me.