Who has the best price on a Merc alignment tool?
 

I need a bravo alignment tool. Who has the best deal?

Re: Who has the best price on a Merc alignment tool?
 

I got mine from http://www.boatfix.com/ . Was about $80 (+ shipping) for real one from Mercury Marine.
Edit: You may want to call and ask George for the real one from Merc. Otherwise you might get an aftermarket branded one.

Re: Who has the best price on a Merc alignment tool?
 

I think I paid $50 at a local auto / marine parts store

Re: Who has the best price on a Merc alignment tool?
 

BTW- I have a custom made one you can have, but it doesn't fit the newer style couplers.

Re: Who has the best price on a Merc alignment tool?
 

Thanks guys. I DO want the real one from Merc.

Re: Who has the best price on a Merc alignment tool?
 

You should get the ITS tool. It can be used with all Bravo's. I think it's easier to use. 91-840965A1

Re: Who has the best price on a Merc alignment tool?
 

Hey Falcon,

I took your advice and bought the ITS tool. Do you slide the larger diameter part of the tool in first and then the thinner longer part inside of that? I guess the larger part keeps it centered in the gimball bearing? I'm not exactly sure how to use this tool.

Thanks,
Dave

Re: Who has the best price on a Merc alignment tool?
 

Gusman refers to it as the "donkey dick"....:D

Re: Who has the best price on a Merc alignment tool?
 

There are 2 parts to the alignment, aligning the gimbal bearing and setting the engine angle. The bearing is what's sometimes called a "self" aligning bearing. Not really correct in this instance. The angle of the bearing can be changed. Place the outer part of the tool into the bearing, you will notice some play in the bearing, some play is normal. Push the internal part of the tool through and check to see if it seems well centered in the coupler splines. You can feel when it hits the end of the splines and seems like it will at least start into the coupler splines. If it's not correct, you can pull back the internal part of the shaft some and try to move the bearing in the right direction. Try again and repeat until the bearing is well aligned.
When the bearing seems aligned, you can just try using the tool just like the standard one, does it go into the coupler splines all of the way? If not, the ITS tool has an advantage. Remove the outer part from the bearing. Put the internal shaft through the bearing and into the coupler splines. Look into the bell housing and you can look at the gap between the tool and the gimbal bearing. Move the front of the engine around until it seems well centered. Put the outer part into the gimbal bearing. Is it an easy fit? If so, you are done!
It's much easier to show than to explain!

Good luck!

Re: Who has the best price on a Merc alignment tool?
 

Falcon with your knolodge helping others on this board is invaluible and very apperciated !!

Thanks

Rob :drink:

Re: Who has the best price on a Merc alignment tool?
 

Thanks Falcon....Good job explaining how to do it right. Now could you put that on a video and send it to me!!? :D

anyone have this tool for sale in hand? Part 91-840965t01, or 840965a1? need one as soon as possible. Can't find anyone that has it in stock or used.

We have an A1 on the shelf, you can order here:

http://www.mercruiserparts.com/partsByNumber.asp

As you know it has been superceded to the T01, but the A1 is what we have on the shelf. Same price. Can ship today.

Scott Mander @ speed&custom marine (e-bay)

98 bucks !!

I don't see one on ebay for the ITS sysytem. I was told that the imco one is not the same.

Does P/N 91-840965T01 work with the newer engine couplers, the ones with the tube extension? I assume it does but want confirmation. Thanks!

Yes it should! It will work with the ITS and standard Bravo transom assemblies, coupler style does not matter.