4th July Damage Report ...[Pictures]
3 Attachment(s)
I was cruising about 2400rpm and the vertical shaft took a dump :( .There wasn't much load on the drive the motor only reved up to 2900 rpm :eek: it took 2 hours at 9 mph to get back to the dock.
Take a look at the picks and see what ya think. Do they usually break in the area?? The shaft looks like it has a different color metal in the middle .A void? Its not really twisted that much.Its a Bravo one style drive Aftermarket vertical shaft. Thanks Rob :eek: |
Re: 4th July Damage Report ...[Pictures]
|
Re: 4th July Damage Report ...[Pictures]
What did your boat do when it broke? I have some damage from 4th of july as well but still trying to figure out what happened. Read my post and let me know it is similiar. Post is "help, can you tell me what happened"
|
Re: 4th July Damage Report ...[Pictures]
Originally Posted by Strip Poker 388
I was cruising about 2400rpm and the vertical shaft took a dump :( .There wasn't much load on the drive the motor only reved up to 290000 rpm :eek: it took 2 hours at 9 mph to get back to the dock.
Take a look at the picks and see what ya think. Do they usually break in the area?? The shaft looks like it has a different color metal in the middle .A void? Its not really twisted that much.Its a Bravo one style drive Aftermarket vertical shaft. Thanks Rob :eek: might have something to do with the motor revving up to 290000 rpms |
Re: 4th July Damage Report ...[Pictures]
Originally Posted by masher44
might have something to do with the motor revving up to 290000 rpms
This looks like the only damage .I have heard the vert shaft usually doesn't break. We where taking it easy at the time . I have run it hard before but I allways wait till I get past peak torque before going to the wood with it .The worst part about it was I had people with me on there vacation also . wantacat Luckily I wasn't in the throttle much or it would of found the rev limiter :eek: Rob :drink: Click on thumb for Big Pick :eek: :eek: http://fapomatic.com/thumbs/54/ship_...tdrive_049.jpg |
Re: 4th July Damage Report ...[Pictures]
I will get pictures :mad: :mad: crusing @ 4800RPM started to slow down dropped both valves on the #1 cylindar of my brand new Merlin 540 :mad: :mad: ..........cause leaky old header.......... :mad: :mad:
BTW i was at 90MPH :evilb: :evilb: |
Re: 4th July Damage Report ...[Pictures]
|
Re: 4th July Damage Report ...[Pictures]
|
Re: 4th July Damage Report ...[Pictures]
1 Attachment(s)
Originally Posted by tomtbone1993
I will get pictures :mad: :mad: crusing @ 4800RPM started to slow down dropped both valves on the #1 cylindar of my brand new Merlin 540 :mad: :mad: ..........cause leaky old header.......... :mad: :mad:
BTW i was at 90MPH :evilb: :evilb: It sux breaking on vacation.Its time to turn up the boost :evilb: |
Re: 4th July Damage Report ...[Pictures]
Strip,I broke a max machine worx alloy vertical shaft last year in EXACTLY the same spot,right above the bearing race where shaft is the biggest,you'd think they'd shear off at the end. It sucks because the tiny bit i ran it after breaking sent metal thru every bearing,Smitty
|
All times are GMT -5. The time now is 09:05 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.