380 Avenger PowerQuest Owners!!
#1
Charter Member #601
Charter Member
Thread Starter
380 Avenger PowerQuest Owners!!
Hope I caught your attention. Looking at putting Imco -2" shorties on a 380 with 502 power.
I am wondering if anyone has done this and had any luck with this setup?
Thanks for any info in advance!!
Dick
I am wondering if anyone has done this and had any luck with this setup?
Thanks for any info in advance!!
Dick
#2
Platinum Member
Platinum Member
Join Date: Aug 2002
Location: Clinton IL. / LOTO 28mm
Posts: 854
Likes: 0
Received 0 Likes
on
0 Posts
Re: 380 Avenger PowerQuest Owners!!
Sorry no shorties but do have 12" boxes, havent seen any others with boxes. Once you do this let me know your results though.
#4
Registered
iTrader: (1)
Re: 380 Avenger PowerQuest Owners!!
Originally Posted by Mr Gadgets
Hope I caught your attention. Looking at putting Imco -2" shorties on a 380 with 502 power.
I am wondering if anyone has done this and had any luck with this setup?
Thanks for any info in advance!!
Dick
I am wondering if anyone has done this and had any luck with this setup?
Thanks for any info in advance!!
Dick
#6
Charter Member #655
Charter Member
Re: 380 Avenger PowerQuest Owners!!
Dick are you putting shorties together? I always wondered what I might gain with them. What would it cost to put my gears in a Imco shorty housing?
__________________
If your boat has a sail do you ride a horse to the ramp?
If your boat has a sail do you ride a horse to the ramp?
#7
Registered
Join Date: May 2002
Location: Deeee-troit!
Posts: 3,358
Likes: 0
Received 0 Likes
on
0 Posts
Re: 380 Avenger PowerQuest Owners!!
Dick, can you make sure Dyno's drives have the special "slight oil leak" option? He just can't feel at home unless there's some petroleum product leaking from his boat.
#9
Charter Member #601
Charter Member
Thread Starter
Re: 380 Avenger PowerQuest Owners!!
Ms...
No.. no new boats for me till I get to 100 drive repairs per season, then maybe.. *S* a long way to go..
dyno,
I have been building Imco lowers, give me a call and I can figure a price for you.. lots of options! 616-335-8446
Jamakin
Seems it is a 2000 or a 2001, not really sure.. it does have two steps in the hull and it runs in the 72 or so with the power it has now. Seems the bow is kinda sticky, so I would like to know if shorties will work good on this hull.. or do the steps not help on this particular hull...
Thanks
Dick
No.. no new boats for me till I get to 100 drive repairs per season, then maybe.. *S* a long way to go..
dyno,
I have been building Imco lowers, give me a call and I can figure a price for you.. lots of options! 616-335-8446
Jamakin
Seems it is a 2000 or a 2001, not really sure.. it does have two steps in the hull and it runs in the 72 or so with the power it has now. Seems the bow is kinda sticky, so I would like to know if shorties will work good on this hull.. or do the steps not help on this particular hull...
Thanks
Dick
#10
Charter Member #655
Charter Member
Re: 380 Avenger PowerQuest Owners!!
Dick you need to build a pair so I can try before I buy!!! what if they slow me down and I cant get on plane? You think you could have them ready for the Hardy Party and a truck full of props to try??I'llbet you would have people lining up to try them
__________________
If your boat has a sail do you ride a horse to the ramp?
If your boat has a sail do you ride a horse to the ramp?