Offshoreonly.com - 598ci Dyno Numbers

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - 598ci Dyno Numbers (https://www.offshoreonly.com/forums/general-boating-discussion/107771-598ci-dyno-numbers.html)

FASTERDAMITT

07-15-2005 10:13 AM

598ci Dyno Numbers

2 Attachment(s)

598 Going in the Superboat this weekend. Just run the dyno last night. What do ya think?

Wobble

07-15-2005 10:20 AM

Re: 598ci Dyno Numbers

Great numbers, I'll bet you are pleased. It's going to be hard on the drive though.

Stormrider

07-15-2005 10:24 AM

Re: 598ci Dyno Numbers

Nice power. You should be running real fast!

jdnca1

07-15-2005 11:13 AM

Re: 598ci Dyno Numbers

Very impressive for hydralic roller motor and mufflers! What timing did you end up running ~32ish? How big is the Dominator?

I would've like to seen what happened on a pull to 6400.

Do you think the oil pan is big enough? :D :drink:

FASTERDAMITT

07-15-2005 11:23 AM

Re: 598ci Dyno Numbers

Quote:

Originally Posted by jdnca1

Carb is a 1050. I'm not sure of the timing. I'll have to look. Valve covers and pan are "one off" built for my engine. :drink:

Strip Poker 388

07-16-2005 12:14 PM

Re: 598ci Dyno Numbers

Nice #'s!! The oil pan looks like a Billet Fabrication pan.

Westtech is one of the best in the country,Good choice :drink:

Good Luck

Rob :drink:

dykstra

07-16-2005 12:40 PM

Re: 598ci Dyno Numbers

impressive

Strip Poker 388

07-16-2005 02:11 PM

Re: 598ci Dyno Numbers

Quote:

Originally Posted by JC performance engine

Keep a close eye on that balancer you have.I had one come apart on me.You should try a HVH supersucker carb spacer.Its worth about 10 to 15 HP.

What kind of ballance it that ?? I dont reconize it.

Raylar

07-16-2005 02:12 PM

Re: 598ci Dyno Numbers

NO REPLACEMENT FOR DISPLACEMENT!! Great numbers for an N/A motor. Should be a screamer in your boat when dialed in. Good Luck!

Ray @ Raylar

tomcat

07-16-2005 06:21 PM

Re: 598ci Dyno Numbers

Very Nice! I like the "relatively" mild cam made possible I'm guessing by excellent head flow numbers.

FASTERDAMITT

07-16-2005 11:09 PM

Re: 598ci Dyno Numbers

Thanks guys. The timing was at 38 deg. We pulled hard down to 3500 with no detination on 91 octane.
JC PERF, how old was the damper that came apart?

FASTERDAMITT

07-17-2005 01:22 AM

Re: 598ci Dyno Numbers

Hmm. must have been a defect.

WETTE VETTE

07-18-2005 10:16 PM

Re: 598ci Dyno Numbers

Nice numbers! Be careful with that 38 degree timing setting. Dyno and boat are not exactly the same. Particularly when running WOT for extended periods. I run a similar 598 using Dart 355 CNC heads, solid roller, 10:1 and a larger carb. It runs very strong at 32 degrees of timing. Good luck!

Craig

Pure Energy

07-18-2005 11:11 PM

Re: 598ci Dyno Numbers

My Y2k had a procharged 500 in it at one point and they said they were running 94. Supposedly pushing 750 HP. If that's true.....well, you better wear a PFD!!! :D

FASTERDAMITT

07-19-2005 01:33 AM

Re: 598ci Dyno Numbers

PURE ENERGY, Race jackets on order!

All times are GMT -5. The time now is 10:09 AM.