Bent steering piston
I didn't get any response in Q & A...
Great... bent one of the rams on my hydraulic steering, Marine Machine. Is this fixable, or just replace the whole cylinder? Is there anyone in particular to get this from? Not sure if fred sells MM. __________________ |
Re: Bent steering piston
Thx Jeff. Now could you answer your phone!
|
Re: Bent steering piston
Pm or call Pedro at Machine Marine . He is real helpfull and a nice guy . He helped me on my sterring problem , I think he can replace the pistion .
http://www.offshoreonly.com/forums/m...p?userid=60618 Rob :drink: |
Re: Bent steering piston
It will more than likely have to be replaced. If the ram is bent everytime it recedes or extends it will wear the packing and a leak will occur.
The ram can be replaced but by time you have the casing checked and add on the labor it is cheaper to buy a new one. I have a bad Mayfair cylinder on the Cig right now. Raised up the drives, which were not centered, the fitting hit the exhaust and snapped off the fitting. It also bent the ram. :( :mad: :eek: |
Re: Bent steering piston
Thanks guys... got the cylinder off, but can't take the hoses off till the boat is on the trailer in my driveway.
I'll M&M on monday to figure the best way to fix this... quickly. |
Re: Bent steering piston
Hey rob thanks!!! Pedro is the man.
I'll be shipping the cylinder to him tomorrow. They need 1 day to fix and its coming back. At about 1/3 - 1/4 the price of a new one. |
Re: Bent steering piston
Cool... I hope I saved ya some $$.Pedro is a good guy , See if ya can get a free Tshirt. Bings tight with them Tshirts :eek: :drink:
Rob :drink: |
All times are GMT -5. The time now is 09:34 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.