Dyno print out on a set of engines
#11
45 Lip Ship / 900 Zul's
Platinum Member
Thread Starter
Re: Dyno print out on a set of engines
Originally Posted by masher44
Price just went up 20K on that boat with THOSE numbers...
Rick OSG
#13
45 Lip Ship / 900 Zul's
Platinum Member
Thread Starter
Re: Dyno print out on a set of engines
Originally Posted by cuda
And he didn't call you "sailor".
Poor Stecz He has not been the same since
#17
Registered
Re: Dyno print out on a set of engines
I just did one too, Or two, one for each engine
9:1 compression
One 1250 Dominator
603 inches
Max torque @ 5300 - 770 lbs
Max Horsepower @ 6500 -872hp
both in the second pull printed.
9:1 compression
One 1250 Dominator
603 inches
Max torque @ 5300 - 770 lbs
Max Horsepower @ 6500 -872hp
both in the second pull printed.
#18
Registered
Re: Dyno print out on a set of engines
This wilson manifold spacer was worth 7 hp up top but really filled in the torque and power band in the midrange.
#19
Re: Dyno print out on a set of engines
Originally Posted by 2112
This wilson manifold spacer was worth 7 hp up top but really filled in the torque and power band in the midrange.
crank pressure ?
Thanks '
Rob
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#20
Registered
Re: Dyno print out on a set of engines
There is a water temp sender right behind the distributor. that is the front of the engine.
Oh yeah, used 91 octane pump fuel
Oh yeah, used 91 octane pump fuel