Sydwayz

iTrader: (1)

Anyone have any of these laying around? I need 4 of them. I need the ones that are 4 3/4" long, and slip inside a 4" tip.



http://www.eddiemarine.com/cart/deta...CategoryID=144

Thanks in advance.

ActiveThunder

Have you tried Eddie Marine?

Sydwayz

iTrader: (1)

Backorder for 2 weeks at EMI. I have an order in for them through Trick Marine, but I figured while I have to wait, I might as well see if any used ones pop up.

GoCiggie31

You may try cp marine in Rohnert Park near Santa Rosa Ca...1707 585 9871 I was visiting their store yesterday and noticed that they had 2 on display and may have 2 more in stock.
Good luck

Sydwayz

iTrader: (1)

Fred, those are too long. (That's what she said.)

I had Heath call TCM on those. They are 6.5 inches end to end including the mounting tab. I only have 6 inches before my internal flappers would conflict.

The EMI Silencers have an overall length of 4.75 inches. That works for me. I think CPP has them, but I don't believe you have a relationship with them, and they want more for them.

Also, I noticed my CC authorization was only enough for 1 pair. I don't care if you only charge me for 1 pair, but I have a twin engine boat, and will need 2 pair shipped. THANKS!

US1 Fountain

iTrader: (1)

Brian, you can always cut a section out and have it tigged back together to make them shorter. A simple 15 min each job.

Sydwayz

iTrader: (1)

US1, good point. I could just lop off the mounting tab too, and place a bolt through a baffle hole. Fred, I'll have my people talk to your people tomorrow.