Cylinder Head Choice For Blower Motors?
Brodix?
Dart? World? 705ci Supercharged Any Reccomendations Or Really Could Use A Good Education On Heads For These Big Motors |
Re: Cylinder Head Choice For Blower Motors?
AFR, if you go with aluminum. Are you looking for aluminum heads.
|
Re: Cylinder Head Choice For Blower Motors?
Originally Posted by DiamondPerformance
AFR, if you go with aluminum. Are you looking for aluminum heads.
|
Re: Cylinder Head Choice For Blower Motors?
mark, at mer used the profilers on too olds motors...go back and take a look at the dyno numbers, they speak for themselves like 1240hp at 5800rpm 6.5lbs boost
|
Re: Cylinder Head Choice For Blower Motors?
Canfield 350's...out of the box.
|
Re: Cylinder Head Choice For Blower Motors?
Everyone here has a favorite for their own reasons, but the guy building your motors should have his own combination and after all isn't that why you picked that builder?
Just my opinion. |
Re: Cylinder Head Choice For Blower Motors?
I also like 18 degree dart for this CI motor. Big Chief, Big Duke and Profilers are also good choices. 705 is a BIG motor!!!
|
Re: Cylinder Head Choice For Blower Motors?
To get 8:1 compression on a 705 you need a total combustion space volume of over 200 cc. Since big chief style heads were designed for 15:1 drag racing engines, they have very small combustion chambers (65-80cc). What piston would you run?
|
Re: Cylinder Head Choice For Blower Motors?
Everyone here has a favorite for their own reasons, but the guy building your motors should have his own combination and after all isn't that why you picked that builder? |
Re: Cylinder Head Choice For Blower Motors?
What if your going to build your own?? I am looking at 650" or maybe 665" NA... I like the idea of the Dart 383cnc's.. but I am guessing..
|
All times are GMT -5. The time now is 06:50 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.