241 libby project boat
#1
Registered
Platinum Member
Thread Starter
iTrader: (4)
Join Date: Jul 2005
Location: Colorado
Posts: 592
Likes: 0
Received 0 Likes
on
0 Posts
241 libby project boat
just bought an 89 241 liberator with twin omc 350's.
lots of rotten wood, fiberglass repair is needed, as well as one engine rebuilt.(will do both just cuz) does anyone have this boat and some advice? I could use a bunch of pics because i bought it in pieces!!!
lots of rotten wood, fiberglass repair is needed, as well as one engine rebuilt.(will do both just cuz) does anyone have this boat and some advice? I could use a bunch of pics because i bought it in pieces!!!
#5
Platinum Member
Platinum Member
Join Date: May 2003
Location: newbugh ny
Posts: 2,177
Likes: 0
Received 0 Likes
on
0 Posts
Re: 241 libby project boat
i had a 201 liberator 350/omc for three years. just traded it in this year. it was a 1990. i got sick over the omc thing. do you have cobras or king cobras? i had too much of a hard time finding parts but many people have told me it wasnt hard. i was told that king cobras where one of the strongest drives when built right. good luck to you and if you have ?s in the drive area i will be happy to help you out.
#6
Registered
Platinum Member
Thread Starter
iTrader: (4)
Join Date: Jul 2005
Location: Colorado
Posts: 592
Likes: 0
Received 0 Likes
on
0 Posts
Re: 241 libby project boat
yesrej,
they are king cobra with clutch dogs, I've done alot of snooping around online and found some valuable info.
Does anyone have info on welding to the transom assembly???, some of the bottom is corroded and bolt holes are showing!!!
they are king cobra with clutch dogs, I've done alot of snooping around online and found some valuable info.
Does anyone have info on welding to the transom assembly???, some of the bottom is corroded and bolt holes are showing!!!