Alarm=engine Cutting Out!!!
I just had this start happening. My alarm will go off and at the same time my motor will cut out 4,000rpms drop to like 3,000 then jump back up....... I checked everything I could but need to know what sensors trip the alarm and will cut the ignition? I know it is not the drive res. because I unplugged them and it still did it. Thanks
2000' 454mag mpi |
Re: Alarm=engine Cutting Out!!!
Mine did the same thing. had a broken water pump impeller giving inadequate flow resulting in a overheat situation.
|
Re: Alarm=engine Cutting Out!!!
Did your gauge show a hot condition because my gauges all read normal. I just have to track down which alarm sensor is bad and cause it to cut the igniton for a split second.
|
Re: Alarm=engine Cutting Out!!!
Your alarm will sound under the following conditions.
1 Low oil pressure 2 Engine overheating 3 Low drive resovoir |
Re: Alarm=engine Cutting Out!!!
I had the same thing happen on my 25 outlaw It was a loose wire under the dash
|
Re: Alarm=engine Cutting Out!!!
Try the ignition switch. I had a similar issue and the switch was bad. If you wiggle the key while running, the engine would do the same. Just another idea.
|
All times are GMT -5. The time now is 10:43 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.