Aqua Buff, (do i need to use both)
 

I have a heavily oxidized boat, so i plan to use the Aqua Buff 1000, after the 1000, what is the best product to use, ive had good luck with the 3m for waxing so i was going to wax with that, or do i need the 2000 aqua buff???

Lets hear the secrets to applying the AB, what works best?

Re: Aqua Buff, (do i need to use both)
 

I can give you a deal on both. I tried them on my gelcoat and it didnt work for me.

Re: Aqua Buff, (do i need to use both)
 

what was the problem, did you find anything that did work, seems from other posts some people love it and some hate it

Re: Aqua Buff, (do i need to use both)
 

A LOT of water! Keep a spray bottle near you and keep it wet.
I would use both or finish with something like Finesse-it from 3M.

BTW I agree with Formula31 I will never buy this product again it is way too messy with so so results. Next year I go back to 3M or try Maguires buffing products.

Re: Aqua Buff, (do i need to use both)
 

I use something called Wizards Turbocut. It is also a water based compound and was recommended specifically for my 88 red hull. The Aqua Buff may be fine on other gels but not mine.

Re: Aqua Buff, (do i need to use both)
 

I swear by Aqua Buff. As mentioned, the secret is to use PLENTY of water with it. Use the 1000, then the 2000, then we was with Meguiars 56.

Re: Aqua Buff, (do i need to use both)
 

i assume from your name youve got a formula hull, ive got an 87 formula hull, so i wonder what is recomended for that hull?

Re: Aqua Buff, (do i need to use both)
 

Opps, if you were talking to me, This was on a 28 cruiser rogue. My formula sr311 was mostly white and wax was all I ever needed.

Re: Aqua Buff, (do i need to use both)
 

The secret to AB is to use plenty of water I kept a small bucket of water handy to wet everything down, then use any good marine wax. Let the fun begin :D

Re: Aqua Buff, (do i need to use both)
 

I used AB as well 1000 then 2000), and had good results. However, it is messy with all the water flying around at 2600 RPMs. I finished my boat with Waxing Frenzy.