500 efi intake manifold needed!
#1
Registered
Thread Starter
500 efi intake manifold needed!
Finally my motor is going in and it is found that the intake manifold is coroded and needs replacing. Does anyone have a lower intake for the 500 efi maybe from a whipple takeoff. Thanks, Marty.
#2
Registered
iTrader: (2)
Re: 500 efi intake manifold needed!
Originally Posted by cobra marty
Finally my motor is going in and it is found that the intake manifold is coroded and needs replacing. Does anyone have a lower intake for the 500 efi maybe from a whipple takeoff. Thanks, Marty.
903 786 3797 Matt
#4
Registered
Thread Starter
Re: 500 efi intake manifold needed!
Matt I'll call you today. Phantom PM with what you have.
I want two lowers and I am going to cut the runners down on one about 1-1 1/2" and then send them to Extrude hone where they will flow them before and after their extrude hone process. I will have 4 sets of data to look at.
I want two lowers and I am going to cut the runners down on one about 1-1 1/2" and then send them to Extrude hone where they will flow them before and after their extrude hone process. I will have 4 sets of data to look at.
Thread
Thread Starter
Forum
Replies
Last Post
2 Trick Rick
General Q & A
8
11-10-2006 03:50 PM