Parts needed
 

Looking for (2) used sets of Stainless Marine exhaust manifolds with risers for a big block. (2) used oil pans for big blocks. Also, does anyone have (1) new marine 800 cfm double pumper lying around.

Thanks in advance.

Ed

Re: Parts needed
 

I know I don't have the exhaust lying around. What generation blocks do you have? Do you have 1 or 2 pc rear main seals? I know I have a couple of oil pans lying around. I'll also ck on the carb.

John S. :D

Re: Parts needed
 

John, thanks. They are the one piece seal for V or VI. Please let me know.

Ed

Re: Parts needed
 

we have one set of manifolds, i will make you a deal...800-376-1616

Re: Parts needed
 

Call Gary Meisenberg at Oshkosh Marine, 920-236-4220 should have what you need

Re: Parts needed
 

Hello Ed, I do have 2 Gen V,VI oil pans at the shop. We'll take $25.00 a piece for them plus shipping. They are used but in very good shape. No rust at all. I can shoot you a picture if your interested.

Sorry it took so long.

John S. :D

Re: Parts needed
 

Do you need any head gaskets for those motors. I have 4 brand new 17048 Fel-Pro gskts that I need to sell. I'll let them go for 40.00 each. I ended up using a different gskt because I am running eight lbs. of boost.

Re: Parts needed
 

I've got one exhaust set.........2 hrs. on it
and I have a brand new , in the box 750 or a used 800 carb

Mike............732 740-2333

Re: Parts needed
 

John S. you have a PM..

Thanks.

Ed

Re: Parts needed
 

Ed, I have two brand new in the box, no fuel thru them Holly 4150 850 CFM carbs. Pre jetted for a 502. I also have two brand new 6 quart oil pans for the GEN VI block, but not a true marine pan. You purchase a carb, you get a pan. Not recommended, but your choice. You should really run a marine pan of at least an 8 quart capacity.