oil pans
Ok. So I already did the search on oil pan threads.
It seems that Stef's is the leader, except for one very unhappy customer and a possible long wait. Canton is a close second with no complaints, and an Olsen here and there. These threads were a couple years old so I'd like to get an update. Who likes what oil pan and why? So lets hear it! DAVE |
Re: oil pans
Do not use MILODON pans. My ex son in law put them on his 540's. the leak and do not fit very well. They were a b!tch to install. An engine builder used a pair on a pair of 588's I bought. These were the 12/14 qt true offshore style. They were also junk. I have run Canton's successfully in the past on 468's and 540's in the past. There is a reason the MILODON's are cheap. My current pan's are Olson's and I am pleased with them. You might want to look at an aluminum pan from Eikert/Hardin for the ultimate. Joe Murray
|
Re: oil pans
Your lucky day - I have (2) cast aluminum Kieth Eickert Pans looking for a new home - These also have the bosses for a front mount oil pump - $ 300.00 each. 571-259-4056
|
Re: oil pans
Thanks Joe. Milodon wasn't even a consideration. I have all the catalogs and price lists. Olson is $600!!!
Right now I'm really concentrating on Stef's and Canton steel pans. I have reservations about aluminum. But, thanks for offer James. DAVE |
Re: oil pans
hey Fred, I was gonna call you to see if you had any. :D
It's a Dart (mark 4, 2 piece rms) 4.5 stroke I really like the Canton 18-380 and of course I'll need the 18-381 p/u and the 20-850 dip stick. DAVE |
Re: oil pans
hardin 14 qt pan= JUNK,Crappy fit
|
Re: oil pans
I've used Cantons a number of times with no problems. My only dislike with them is the generic , one size fits all dipstick. Check levels before installation.
|
Re: oil pans
I had Stef's put on my Sterlings last winter. Really like them.
|
Re: oil pans
Dooley pans are good.
|
Re: oil pans
Originally Posted by mopower
I've used Cantons a number of times with no problems. My only dislike with them is the generic , one size fits all dipstick. Check levels before installation.
Thanks for the tip. DAVE |
All times are GMT -5. The time now is 10:54 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.